Shop
₹1,454.96 incl GST
The NEO-M8M GPS Module with Ceramic Active Antenna series of concurrent GNSS modules is built on the high performing M8 GNSS engine in the industry proven NEO form factor.
The NEO-M8M is optimized for cost-sensitive applications, while NEO-M8N/M8Q provides the best performance and easier RF integration. The NEO-M8N offers high performance also at low power consumption levels. The future-proof NEO-M8N includes an internal Flash that allows future firmware updates. This makes NEO-M8N perfectly suited to industrial and automotive applications.
The NEO-M8 modules can also benefit from the u-box AssistNow assistance service. The Online service provides GNNS broadcast parameters, e.g. ephemeris, almanac plus time or rough position to reduce the receiver’s time to first fix significantly and improve acquisition sensitivity. The extended validity of AssistNow Offline data (up to 35 days) and AssistNow Autonomous data (up to 6 days) provide faster acquisition after a long time.
₹514.56 incl GST
This is 5.8G 3dBi FPV TX RX Antenna Pair (Male SMA), a Circular Polarized Antenna TX&RX, SMA Plug improve wireless range fit DJI. It can Greatly improve the range and be covering of your wireless video transmitting and receiving system. This B5.8GHz Cloud Spirit Antenna Set is designed for use in FPV applications. They are a refined version of the traditional “clover-leaf” FPV antennae but are now housed in an RF transparent dome. This offers better looks and excellent protection. They are bendable, easy to set up and use standard SMA connectors. The package comes in a pair that includes one Antenna each for transmitter and receiver.
₹40.00 incl GST
This is a 2dBi Gain Dual Band 3G / 4G LTE Antenna with an SMA-Male connector having a frequency of 900M 1800mhz
This compact GSM900/1800 omnidirectional “rubber-duck” GSM antenna provides broad coverage. It is a coaxial sleeve design with an omni-directional pattern.
This antenna was also designed to transmit on the 900mhz frequencies with a top end transmission not to exceed 25 watts. Works for the current Mobile Communication.
A highly optimal design for direct mounting, this STUB avoids a Coaxial cable by mounting the antenna directly to the SMA connector. This results in low losses due to the reduced interconnects and forms a tidy and convenient antenna solution. This antenna features a Straight SMA connector, allowing them to be used vertically, at a right angle. It is suitable as a replacement RF antenna for many access points and radios that are equipped with SMA connectors such as mobile, wireless pay phone, fixed commercial phone, PCMCIA card, navigation device, vehicle wireless device.
Applications:
- GSM/GPRS antennas are mainly applied to the follows
- Indoor signal coverage system,
- Security system,
- Wireless data collection system,
- Wireless electric power communication
- Wireless public payphone system
₹488.80 incl GST
The Antenna has SMA Male Plug Connector for RC FPV Racing Drone Quadcopter. The Polarization is RHCP(Right-hand Circular Polarization). The 5.8G Lollipop Antenna(Long) is an Omni-directional circularly polarized 5.8GHz FPV antenna with great performance and is small in size. The 5.8G Lollipop Antenna(Long) has an excellent omnidirectional radiation pattern along with a good axial ratio, giving you solid all-around coverage. The Antenna has a smoother radiation pattern and a significantly better axial ratio than most other antennas. This antenna’s simplified manufacturing process keeps costs low allowing for a great low price for an antenna with high performance.
₹1,060.80 incl GST
2.4G 4CH RC Receiver Compatible with D8 D16 With PWM Output for FRSKY T16 X9D Transmitter
Specifications:
- Working frequency: 2400Mhz-2483. 5Mhz
- Working mode: Frequency-Hopping Spread Spectrum
- Working voltage: 4.0V-15V
- Working current: <25mA (+8.0V)
- Output channel: 4CH PWM
- Size: 27.7 x 12.7 x 10mm
₹6,352.32 incl GST
Matek Mateksys F411-WSE Compact Flight Controller & BEC 5V Output Built-in 2-6S ESC 78A Current Senor For iNAV RC Drone Wing FC Firmware
- INAV Target: MATEKF411SE
- Input voltage range: 6~30V (2~6S LiPo)
- 2x ESC power pads
- Battery Voltage Sensor: 1:10 (Scale 1100)
- Current Senor: 78A, 3.3V ADC, Scale 423
- Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
- Continuous current: 2 Amps, Max.3A(5seconds/minute)
- Designed for Servos
- Voltage adjustable, 5V Default, 6V option
- Continuous current: 3.5 Amps, Max.5A(5seconds/minute)
- Designed for Baro / Compass module/OLED and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
- Mounting: 24 x 24mm, Φ2mm
- Dimensions: 28 x 28 x 14 mm
- Weight: 8.5g
₹2,598.96 incl GST
This is a Lora 868MHz Shield for TTGO T-SIM7000G Module Unsoldered. It allows data transmission in a certain km through the serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as a certain km. Also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on. The module achieves a longer communication distance, higher rate, lower consumption, better safety, and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.
₹728.00 incl GST
- This drone is 3D Printed built from PLA , and it it strong and bold It doesn't require any support material, and it can hold even larger drones at a cool looking 25 degree angle very securely. It can hold a range of drones, from larger drones to smaller drones .It will fit your quad in it's default scale and it can be used for displaying your dronesSpecifications :PLA Material 13.5 cm from base Includes : 1 x Drone Stand
₹1,300.00 incl GST
Specifications :-
Model FS-iA6B No. of Channels 6 No. of Band 140 Encoding GFSK. RF Range 2.40552.475 GHz. Rx Sensitivity (dBm) -105 Operating Voltage (VDC) 4.0 ~ 8.4V i-Bus Interface Yes Data Acquisition Interface Yes Antenna Length (mm) 26 Video Format Supported NTSC/PAL Color Black Net weight (gm) 14.9 Dimensions (mm) LxWxH 47 x 26.2 x 15 ₹2,600.00 incl GST
HGLRC KT20 2 inch FPV Frame Kit Feature: *The Frame supports (25.5×25.5mm) installing holes; *Kart […]
₹3,941.60 incl GST
The Veyron30CR 3″ CineWhoop Frame Kit by HGLRC is a lightweight frame made out of […]
₹385.84 incl GST
SKU ACC-STA-DYA61RAG0219BLA-10 NAME M2*19 Knurled Standoff (10/pcs) DESCRIPTION For M2 Screws Height:19mm OD:3.5mm Color: […]
