Features

• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires.)
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• Designed to support DJI Digital FPV

FC // SucceX-D F7 V2.2 TwinG

• MCU: STM32 F722
• Gyro：ICM20689
• Baro: DPS310
• Blackbox：32MB
• Betaflight OSD: YES
• BEC: 5V 2.5A / 9V 2.5A
• Current sensor scale:  100
• Inverter for SBUS input (UART2-RX)
• Smartaudio & Tramp VTX protocol supported
• Beeper pad : Yes
• RSSI input pad: No
• UARTs：5
• Uart:4*UART(UART1、UART2、UART4、UART5)
• UART1 for Receiver
• UART2for VTX HD/Analog Telemetry
• UART4 for GPS or other sensors that require a serial port
• UART5 for ESC Telemetry
• Motor outputs: 8
• Input voltage：recommended 2-6S, MAX 8S
• Firmware target: IFLIGHT_F722_TWING
• Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
• Dimensions:   36*36mm
• Weight: 8.1g
• USB type-C

Changelog:

Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented.

Before target BTFL4.2.4 changed to IFLIGHT_F722_TWING

ESC // SucceX 60A V2 4in1

Top Features:

– 8 layers single-board stacking PCB board

– 4oz 1.6mm thick power board

– 32bit STM32FO51K MCU, 48kHz maximum clock speed

– TDK MLCC Low ESR ceramic capacitors

– Top grade metal MOSFET

Specification:

• MCU: STM32F051
• Up tp 48kHz PWM frequency
• Capacitance: 470uF/50V
• Current Sensor: Yes
• Input: 2-6S LIPO
• Constant: 60A / Burst: 80A
• BlHeli32 telemetry: Yes
• BEC: No
• Supports up to Dshot1200, Proshot, Oneshot, Multishot
• Target: iFlight_G071_4in1
• Weight:14.4g
• Mounting pattern: 30.5*30.5mm/Φ3mm
• Dimensions: 43*39mm (including the power pads)

Package included：

• SucceX-D F7 TwinG FC x 1
• SucceX 60A V2 ESC x 1