The SkyStars Fly Stack features a H743 Single Gyro HD Flight Controller and a KO60 BLHeli_32 4-in-1 ESC with a 30×30 mounting pattern.

• 24 high-quality 5×6 MOSFETs
• latest BLHeli_32 firmware
• 128K PWM output
• Best performance available

H743 HD FC

• MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
• Gyro: BMI270 single
• Baro: BMP280
• OSD: AT7456E
• Blackbox: 16M
• 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
• 8x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C(USB2.0)
• 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• Dual Camera Inputs switch
• VTX 10V/Vbat filtered power ON/OFF switch
• DJI FPV OSD is supported by any spare UART
• Vbat Input: 7~25V (2~6S LiPo)
• BEC: 5V 2A Continuous (Max 3A)
• LDO 3.3V: Max 250mA
• Firmware: Betaflight – SKYSTARSH7HD
• Mounting: 30.5 x 30.5mm
• Dimensions: 39.5 x 39.5 x 7.8 mm
• Weight: 10.1g

KO60 60A BLHeli_32 4-in-1 ESC – 30×30

• Mount: 30.5mm x 30.5mm
• Supports 3-6S
• ESC weight: 14.1g
• Continuous current: 60A
• 32-bit ARM Cortex MCU 32F051 48MHz Processor
• Telemetry: YES
• Current Sensor: YES
• Drive signal: DSHOT150, DSHOT300, DSHOT600 / Proshot1000 / Oneshot / Multishot
• PWM: Up to 128K
• Firmware: BLHeli_32
• BEC: No

• 1x Skystars Fly Stack – H743 Single Gyro HD FC + KO60 60A BLHeli_32 4-in-1 ESC – 30×30