The SkyStars Fly Stack features an F722 HD Pro 3 OSD flight controller and a KO60 60A BLHeli_32 4-in-1 128K ESC with a 30×30 mounting pattern!

• F722 HD Pro 3 OSD Flight Controller
• Betaflight OSD & DJI HD OSD
• 30×30 Mounting Pattern
• K060 60A 128K ESC
• 3-6S LiPo Support
• Barometer

F722 HD PRO 3 OSD FLIGHT CONTROLLER

• Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a
• Installation size: 30.5mm × 30.5mm (The installation hole is M4 and supports shock column installation)
• BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
• LED: 4 LED independent pads, support WS2812 programming lamp output.
• 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) :3
• 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• OSD: Betaflight SPI OSD DJI HD OSD(UART6)
• BetaFlight firmware: SKYSTARSF722Pro
• INAV firmware: SKYSTARSF722HD
• MCU: STM32F722RGT6 216MHz
• External size: 39mm × 39mm
• 6x Uarts: UART 1/2/3/4/5/6
• USB Type: Type-C (USB2.0)
• Flight control weight: 6.9g
• LDO 3.3V: Max.250mA
• Barometer :Bmp280
• Input voltage: 3-6S
• Gyroscope: BMI270
• Black box: 16MB
• PWM outputs: 4
• I2C: 1

KO60 60A 4-IN-1 128K ESC

• Support 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
• Power supply voltage: 3-6S (12-26V)
• Screw hole spacing: 30.5*30.5MM
• Continuous working current: 60A
• No built-in 5V BEC output
• Firmware: BLHELI 32 ESC
• Aperture: 4MM
• Weight: 14.6g

• 1x SkyStars Fly Stack – F722 HD Pro 3 OSD FC + KO60 60A 3-6S 4-in-1 BLHeli_32 128K ESC – 30×30
• 1x JST-GH-6P cable for DJI port, 10cm
• 8x Silicon grommets M4 to M3
• 2x JST-SH1.0_8pin cable, 4cm