Excellent over-current capability

By adopting the best PCB material and PCB production process. Such as the application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with a 6-layer layout design of the board, compared with others that commonly use 4 layers, allowing it to withstand higher current.

Extreme stability and support of 6S LiPo battery

By use of 24 pcs of new Toshiba standard 40V 5×6 Mosfet & electronics imported from USA and Japan.  Plus advanced lead-free SMT Processing technology. It makes ESC fully support the 6s battery and get better performance.

Better Control Performance

Flashed with the latest BLHeli_32 firmware in the factory, support telemetry functions (including voltage, RPMS, & current )

Specifications:

• Mount: 30.5mm x 30.5mm
• Supports 3-6S
• ESC weight: 12g
• ESC onboard current sensor.
• Continuous current: 45A
• Peak current [5 seconds]: 55A
• Drive signal: Dshot300-1200 / Proshot1000 / Oneshot / Multishot / PWM
• MCU: STM32F051 Operation frequency: 48MHz
• Firmware: BLHeli_32
• BEC: No

SkyStars F7 HD Wi-Fi F722 Flight Controller

Specifications:

• MCU: STM32F722RGT6 216MHz 32BIT
• IMU: MPU6000 (SPI)
• Barometer: Yes
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• 6 hardware UARTS (UART1,2,3,4,5,6,)
• Blackbox: 8MB
• LED indicator: Blue for FC Status, Green 9V, Red 5V
• WIFI: SpeedyBee APP target name SKYSTARS F7
• Input voltage: 3-6S LiPo(11.1V~25V)
• LED Controller: 4 corners LED interface to support BF led
• RSSI Pad: YES
• Buzzer Pad: YES
• CURR Pad: YES
• Smart audio: YES
• BEC 5V 2.5A & 10V 2.5A(Max 3A)
• Firmware: SKYSTARS F7HDPRO
• Dimensions: 38.5x40x6.2mm
• Mounting Holes: Standard 30.5mm square to the center of holes
• Weight: 6.6g