FC // BLITZ Mini F7 Flight Controller

Top Features:–  DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)

Specs:GYRO:   MPU6000OSD CHIP:   AT7456UARTS:   6I2C SERIAL:   SDA / SLA PADSLED CONTROLLER:   YESFIRMWARE TARGET:   IFRC-IFLIGHT_BLITZ_F722DIMENSIONS:   30.5X27 MM
– UART 1 FOR VTX HD / ANALOG- UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT1. F722 MCU HAS AN INNER INVERTER.3. FRSKY SMART PORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1

4. F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2

2. SBUS, CRSF, ELRS, IBUS, DSM ETC… CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2

TIPS

– UART 6 FOR ESC TELEMETRY

– UART 2 FOR A RECEIVER

WIRING SUGGESTION:

WEIGHT:   5G

MOUNT PATTERN:   20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS

BEEPER PAD:   YES

SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED

MOTOR OUTPUTS:   4X (SH1.0 CONNECTOR)

FLASH:   16MB (BLACKBOX FLASH)

BAROMETER:   NO

MCU:   STM32 F722

– FC INDICATOR LEDS FOR VISUAL DEBUGGING

– IMPROVED CIRCUIT DESIGN, BETTER COMPONENTS AND LOWER ELECTRICAL NOISE!

ESC // BLITZ Mini E55 4-IN-1 2-6S ESC

SPECIFICATION:
– MOUNTING HOLES: 20*20MM/Φ4MM- SUPPORTS 2-6S LIPO INPUT- CONSTANT: 55 AMPS – CURRENT SENSOR: YES- CURRENT RATE: 100
– FIRMWARE: BLHELI 32

– TARGET:   IFLIGHT_BLITZ_G1

– SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.

– BEC: NO

– BURST: 60 AMPS

– MCU： G071

– WEIGHT: 11.3G

– DIMENSION: 35*42MM

Package included:

– 1pc x BLITZ Mini F7 Flight Controller

– 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC

– 1set x silicon grommets

– 1set x wire harness for F7 Flight controller