Electronics
₹6,499.00 incl GST
Top Features: • DJI Plug-and-Play – No need to solder tiny wires! FC // SucceX-D […]
₹8,142.00 incl GST
Big solder pad PIT mode for vtx power Standard 20mm/M3 square to center of holes
₹6,533.00 incl GST
Specifications: Size:30.5*30.5mm Mounting pattern:25.5*25.5mm/φ3mm Weight: 7.5g MCU:STM32F411 Gyro:BMI270 Blackbox:8MB BEC output: 5V 2A Config:IFLIGHT_F411_PRO.config INA […]
₹8,492.00 incl GST
SKYSTARS F722Mini HD Pro Flight Controller & KM55A ESC Description: Specifications: SKYSTARS F722 Mini HDpro […]
Specifications: Model: FOXEER Reaper AIO V3 CPU: STM32F745 Power Supply: 2~6S Lipo(8.4~25.2V) BEC Output: DC5V/2.5A […]
₹6,974.96 incl GST
₹7,267.50 incl GST
₹7,683.52 incl GST
SucceX Mini 45A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC Features • 4x F051 MCU processers • TDK MLCC Low […]
₹11,499.00 incl GST
The SucceX 60A Plus V2.1 32bit BL Dshot 1200 4in1 ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051 MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation.
Standard 30.5*30.5 Φ3mm mounting holes; Vibration and impact can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy fixes or adjustments; Countersunk holes on the soldering pad enable each layer board can be powered.
₹8,499.00 incl GST
₹3,485.04 incl GST
SucceX X80A 32bit BLHeli Dshot1200 Single ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz SG071 MCU and 11 pieces TDK MLCC total 240UF Low ESR capacitors bring faster-responding speed and smoother flying experience.
₹6,352.32 incl GST
Matek Mateksys F411-WSE Compact Flight Controller & BEC 5V Output Built-in 2-6S ESC 78A Current Senor For iNAV RC Drone Wing FC Firmware
- INAV Target: MATEKF411SE
- Input voltage range: 6~30V (2~6S LiPo)
- 2x ESC power pads
- Battery Voltage Sensor: 1:10 (Scale 1100)
- Current Senor: 78A, 3.3V ADC, Scale 423
- Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
- Continuous current: 2 Amps, Max.3A(5seconds/minute)
- Designed for Servos
- Voltage adjustable, 5V Default, 6V option
- Continuous current: 3.5 Amps, Max.5A(5seconds/minute)
- Designed for Baro / Compass module/OLED and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
- Mounting: 24 x 24mm, Φ2mm
- Dimensions: 28 x 28 x 14 mm
- Weight: 8.5g